Publications

Documents published by the Energy Savings Scheme

Found 9 results

  1. Application Guide - Commercial Lighting

    pdf 581.72KB, Last updated 30/08/2013

    This guide provides information on how to apply to become an Accredited Certificate Provider using the Commercial Lighting Energy Savings Formula under the Deemed Energy Savings Method.

  2. Application Guide - High Efficiency Motors & Power Factor Correction

    pdf 250.82KB, Last updated 09/01/2012

    This guide provides information on how to become an Accredited Certificate Provider under the Deemed Energy Savings Method for High Efficiency Motors and Power Factor Correction. It explains how to calculate the number of certificates created by your RESA.

  3. Application Guide - Metered Baseline Method

    pdf 319.04KB, Last updated 09/01/2012

    This guide provides information on how to become an Accredited Certificate Provider under the Metered Baseline Method. It explains how to calculate the number of certificates created by your RESA.

  4. Application Guide - Project Impact Assessment Method

    pdf 229.62KB, Last updated 09/01/2012

    This guide provides information on how to apply to become an Accredited Certificate Provider using the Project Impact Assessment Method.

  5. Application Guide - Commercial Lighting Energy Savings Formula

    pdf 534.31KB, Last updated 09/01/2012

    This guide provides information on how to apply to become an Accredited Certificate Provider using the Commercial Lighting Energy Savings Formula under the Deemed Energy Savings Method.

  6. Guide to Commercial Lighting Tool

    pdf 298.03KB, Last updated 27/09/2010

    This guide has been developed to show you how to use the Commercial Lighting Tools

  7. Commercial Lighting Calculation Tool DA v2.5

    xls 989KB, Last updated 17/09/2010

    For lighting upgrades occuring as part of projects requiring Developmental Approval

  8. Commercial Lighting Tool v3.4

    xlsm 516.33KB, Last updated 24/07/2013

    This Tool is provided to allow the calculation of energy savings certificates using standard factors from the Energy Savings Scheme Rule. It also allows for calculations using accepted emerging lighting technology. Approved Extended Operating Hours can also be entered directly into the Tool. As of 24 July 2013, all new applicants and currently accredited ACPs that have not yet created ESCs, are required to use the latest version available of the generic calculation tool.

  9. Application for Amendment form

    docx 280.25KB, Last updated 14/01/2014

    The Application for Amendment of Accreditation Conditions form must be submitted to request a change to Accreditation Conditions.