Publications

Documents published by the Energy Savings Scheme

Found 9 results

  1. Application Guide - Commercial Lighting

    pdf 581.72KB, Last updated 30/08/2013

    This guide provides information on how to apply to become an Accredited Certificate Provider using the Commercial Lighting Energy Savings Formula under the Deemed Energy Savings Method.

  2. Application Guide - Default Savings Factors

    pdf 322.54KB, Last updated 09/01/2012

    This guide provides information on how to become an Accredited Certificate Provider using Default Savings Factors under the Deemed Energy Savings Method. It explains how to calculate the number of certificates created by your RESA.

  3. Application Guide - Commercial Lighting Energy Savings Formula

    pdf 534.31KB, Last updated 09/01/2012

    This guide provides information on how to apply to become an Accredited Certificate Provider using the Commercial Lighting Energy Savings Formula under the Deemed Energy Savings Method.

  4. Required documentation for emerging lighting technologies

    pdf 103.96KB, Last updated 28/09/2011

    Detailed documentation required for emerging lighting technologies including specifications, lamp circuit power, output voltage, electrical safety and electro magnetic compatibility. Version 7 - 15 January 2014

  5. Minimum Requirements for Installer Conduct

    pdf 110.63KB, Last updated 01/02/2011

    Provides guidance for ACPs when using Default Savings Factors

  6. Application for Amendment form

    docx 280.25KB, Last updated 14/01/2014

    The Application for Amendment of Accreditation Conditions form must be submitted to request a change to Accreditation Conditions.

  7. Application Form: Part A

    docx 317.37KB, Last updated 24/07/2014

    V1.0 July 2014.
    This Form is used to make an application for accreditation. It must be supported by an application form specific to the calculation method being used.

  8. Application Guide

    pdf 399.24KB, Last updated 24/07/2014

    V1.0 July 2014.
    The Application Guide describes the process of applying for accreditation. The requirements listed in this guide must be addressed using the Application Form Part A.

  9. ESS Notice 01/2013(V2-0) amended July 2014

    pdf 256.07KB, Last updated 25/07/2014

    This Notice updates the previous Fact Sheet titled “Minimum Requirements for Installer Conduct (Default Savings Factors)”. The scope has been broadened to apply to anyone operating in the ESS who uses third parties in order to claim energy savings and thereby create Energy Savings Certificates. Compliance with these minimum requirements is part of the Conditions of Accreditation applied to every ACP’s accreditation.